Ok, new configuration. This is getting tough to get much further. Remember we need exact error messages to trouble problems. Screen shots or copied text are best.
To keep going we need a drawing of the complete system wiring. It seems the pins and their polarities are changing every iteration, it is impossible to keep up with because we don't have the hardware. There is an old saying in the project management field:
" Plan the work, work the plan or plan to fail."
Z will not try to home now per Tommy's instructions. Still don't know whether the THC..hal needs positive true logic in or negative true logic or a mixture of both. No Z limit connection either, I need a photo of the Z axis mechanics showing the the location and wiring of the limit switch.
John
