RS485 For Hypertherms

phillc54 wrote: That actually looks like a bug in the User Connection Procedure, you should try connecting with the air supplied.

Can you confirm that all these issues arise only when you try connecting with an error present.

Haha the parametric modeling software we use at work would call it an “unintended feature”. :laugh:

Yea, I messed around with it a lot. Seems like that’s the issue, connecting with an error present. In fairness one might not know the error is present without connecting... I fully intend to shove the thing under my table and not look at it a whole lot.

Yea, I messed around with it a lot. Seems like that’s the issue, connecting with an error present. In fairness one might not know the error is present without connecting... I fully intend to shove the thing under my table and not look at it a whole lot.

OK, I'll check it out.

I deleted the last one because it was definitely wrong, so give this one a try.

Rename ~/linuxcnc-dev/configs/by_machine/plasmac/plasmac_run.py to keep as a backup

Copy this new plasmac_run.py to ~/linuxcnc-dev/configs/by_machine/plasmac/

See how it goes.

phillc54 wrote: I deleted the last one because it was definitely wrong, so give this one a try.

Rename ~/linuxcnc-dev/configs/by_machine/plasmac/plasmac_run.py to keep as a backup

Copy this new plasmac_run.py to ~/linuxcnc-dev/configs/by_machine/plasmac/

See how it goes.

Works great! Everything seems to work exactly as it should (or at least how I expect it to)!

I like how the gas defaults to 0 between modes. Good touch.

Up to 32 ounces (or one quart) now I guess! :laugh:

Thanks for taking the time to get this polished up! Much appreciated and I am sure many will benefit from it.

Cool, I knew we would get there eventually. Thanks for testing.

@Phill,
I wanted to click on thank you and thought i'd check how many of them you've got, IT prevented me from clicking !