Raspberry Pi 4 with PlasmaC

More
6 years 4 months ago #170775 by phillc54
Replied by phillc54 on topic Raspberry Pi 4 with PlasmaC

Mike_Eitel wrote: If you ask the transfer from sd to ssd.
7use read in windisk imager to copy sd to pc-disk
Use windisk or i prefere etcher to transfer that copy to ssd.
Working like a charm
Mike


Yes, I always use Balena Etcher and it always works.

Please Log in or Create an account to join the conversation.

More
6 years 4 months ago #170784 by tecno
Replied by tecno on topic Raspberry Pi 4 with PlasmaC
Sorry but that was a no-go = still only SMP

Please Log in or Create an account to join the conversation.

More
6 years 4 months ago #170786 by phillc54
Replied by phillc54 on topic Raspberry Pi 4 with PlasmaC
did you use my config.txt, that is where the rt kernel is selected.

Please Log in or Create an account to join the conversation.

More
6 years 4 months ago - 6 years 4 months ago #170788 by tecno
Replied by tecno on topic Raspberry Pi 4 with PlasmaC
No :( PARTUUID is for your USD drive ?
Last edit: 6 years 4 months ago by tecno.

Please Log in or Create an account to join the conversation.

More
6 years 4 months ago #170789 by phillc54
Replied by phillc54 on topic Raspberry Pi 4 with PlasmaC
That is in cmdline.txt

Please Log in or Create an account to join the conversation.

More
6 years 4 months ago #170791 by tecno
Replied by tecno on topic Raspberry Pi 4 with PlasmaC
OK, here we go again as per your details.

Please Log in or Create an account to join the conversation.

Moderators: snowgoer540
Time to create page: 0.096 seconds
Powered by Kunena Forum