Downlook Camera X Y Offset

I tried qtvcp cam_align and I now have a camera image.image missing /media/kunena/emoticons/w00t.png That under score is what got me

 



 

Is qtvcp recommended over gladevcp ?

just another option. conveniently it already uses opencv.

Note the buttons on top. These call MDI commands but could do other things.

I obviously have a-lot more reading to do. I did notice something about the Axis zero buttons on the default
Glade vcp and how they use a gcode (G10 L20 P0 X0) defined in the ini file. to carry out the action. I will
probably make use of that to enter the camera offset. Say G10 L20 P1 X1.608 Y-0.002 for G54. It's still
early on and I am just throwing idea's at the wall to see what sticks.

most of the cam_align 2.9 docs will work in 2.8 (-o options depend on how new 2.8 is)

linuxcnc.org/docs/2.9/html/gui/qtvcp-vcp...vcp:panels:cam-align

That's good .  Unfortunately I am currently running 2.8.0 on the PnP. I know I should upgrade to 2.9 I am just not
their yet. LOL. Mostly because my experience with Debian has been an exercise in futility.