Post for Vectric W/ATC
- allenwg2005
-
Topic Author
- Offline
- Platinum Member
-
Less
More
- Posts: 330
- Thank you received: 4
02 Mar 2019 21:56 #127551
by allenwg2005
Post for Vectric W/ATC was created by allenwg2005
Hi,
Has anyone got a post processor for Vetric Asipe with Auto Tool Change in it?
Thanks in advance
Has anyone got a post processor for Vetric Asipe with Auto Tool Change in it?
Thanks in advance
Please Log in or Create an account to join the conversation.
02 Mar 2019 22:27 - 02 Mar 2019 22:29 #127553
by FariaAl
Replied by FariaAl on topic Post for Vectric W/ATC
I use this one with Vcarve6.0, and Aspire5.0
Works for me but might need some tweaks for you.
Works for me but might need some tweaks for you.
Last edit: 02 Mar 2019 22:29 by FariaAl.
Please Log in or Create an account to join the conversation.
- allenwg2005
-
Topic Author
- Offline
- Platinum Member
-
Less
More
- Posts: 330
- Thank you received: 4
03 Mar 2019 20:12 #127629
by allenwg2005
Replied by allenwg2005 on topic Post for Vectric W/ATC
FariaAl,
Thank you so very much, this will get me started.
Thank you so very much, this will get me started.
Please Log in or Create an account to join the conversation.
- allenwg2005
-
Topic Author
- Offline
- Platinum Member
-
Less
More
- Posts: 330
- Thank you received: 4
09 Mar 2019 02:30 #128124
by allenwg2005
Replied by allenwg2005 on topic Post for Vectric W/ATC
Here's a PP for Vetric Asipe in inches if anyone wants or needs one.
Thanks for all the help.
Thanks for all the help.
Please Log in or Create an account to join the conversation.
- allenwg2005
-
Topic Author
- Offline
- Platinum Member
-
Less
More
- Posts: 330
- Thank you received: 4
12 Mar 2019 22:54 #128471
by allenwg2005
Replied by allenwg2005 on topic Post for Vectric W/ATC
I had a chance to actually run this PP today (instead of just check it for tool changes).
I had the feed protocols all crossed up, here's a fresh PP with the feeds working.
I had the feed protocols all crossed up, here's a fresh PP with the feeds working.
Please Log in or Create an account to join the conversation.
Moderators: Skullworks
Time to create page: 0.072 seconds