Bobcad Post processor for Mill
25 Jun 2022 15:41 - 25 Jun 2022 15:45 #245865
by Dbsharp
Bobcad Post processor for Mill was created by Dbsharp
Hi, I was only able to find a post for the path pilot and it really was not working well as is for linuxcnc despite many people telling me it would be the same. I wanted to share this in case someone else needed it.
I have worked through all the issues I have found and this post works well for my 3 axis mill with floating tap holders. Use at your own risk, I am no expert!
I have worked through all the issues I have found and this post works well for my 3 axis mill with floating tap holders. Use at your own risk, I am no expert!
Attachments:
Last edit: 25 Jun 2022 15:45 by Dbsharp.
The following user(s) said Thank You: tommylight
Please Log in or Create an account to join the conversation.
- tommylight
-
- Away
- Moderator
-
Less
More
- Posts: 17773
- Thank you received: 5907
26 Jun 2022 11:55 #245910
by tommylight
Replied by tommylight on topic Bobcad Post processor for Mill
Thank you.
Bump to remove it from the "no replies" list.
Bump to remove it from the "no replies" list.
Please Log in or Create an account to join the conversation.
Moderators: Skullworks
Time to create page: 0.084 seconds