Save / Log "Print Message" to file

instead of the file currently loaded into task(s.file),
we must take the file loaded only initially (loaded_file)
 
so

        try:
            count = 0
            for line in open(loaded_file).xreadlines(): count += 1
            vars.len_program.set(count)

            fl = open('/home/nkp/emc2/logfile', "a")
            lnf = len(os.path.basename(loaded_file))
            fl.write(os.path.basename(loaded_file) + (28-lnf)*' ' + time.ctime() + "\n")       
            fl.close()        
        except :
            print "nkplogerror"
ps
probably this does not solve the problem

Gave it a try, the result is following:

Than there is nothing more logged. Attached you can find my remap code (i can translate to english if neccesary)

Best wishes

Jan 

Haha so german is ok?!

the translator doesn't care

do not read line number while subroutine
================================

o<messen> sub
m64p0
#1700=44            (Wechsel X Position)
#1701=0        (Wechsel Y Position)
...
...
m65p0
o<messen> endsub
M2
===============================================
    def update(self):


        if vars.len_program.get() and not self.stat.dout[0]:
            if self.stat.motion_line > (vars.len_program.get() - 4):
                vars.len_program.set(0)
                try:
                    fl = open('/home/nkp/emc2/logfile', "a")
                    fl.write("successful" + 18*' ' + time.ctime() + "\n")       
                    fl.close()        
                except :
                    print "nkplogerror"

==================
 it work for me with your gcode