LinuxCnc logo

More
01 May 2017 08:46 #92415 by TurBoss
Replied by TurBoss on topic LinuxCnc logo
Thank you for the tweaks XXCoder

I'm going to make my own custom splash screen

:)
The following user(s) said Thank You: XXCoder

Please Log in or Create an account to join the conversation.

More
01 May 2017 08:47 #92416 by XXCoder
Replied by XXCoder on topic LinuxCnc logo
No problem. It's nice to finally have big vector mascot! Other guy did most work.
The following user(s) said Thank You: Doug @ Design8Studio.com

Please Log in or Create an account to join the conversation.

More
28 Jun 2017 17:20 - 28 Jun 2017 17:26 #95119 by andypugh
Replied by andypugh on topic LinuxCnc logo
Someone just sent me this one. Perhaps someone here? Hard to tell from the email address

This browser does not support PDFs. Please download the PDF to view it: Download PDF




(Bitmap preview of one of the versions below)

Attachments:
Last edit: 28 Jun 2017 17:26 by andypugh.
The following user(s) said Thank You: seuchato, tommylight, Tchefter, Muecke

Please Log in or Create an account to join the conversation.

More
28 Jun 2017 18:07 #95127 by cvp83
Replied by cvp83 on topic LinuxCnc logo
It was me, cvp83 who sent it to Andy. My daughter made it at my request. I will try to post a higher resolution version soon.
The following user(s) said Thank You: seuchato, tommylight, KCJ, Doug @ Design8Studio.com

Please Log in or Create an account to join the conversation.

More
28 Jun 2017 18:14 #95128 by andypugh
Replied by andypugh on topic LinuxCnc logo
I would think that .svg format would be the most useful.

(note that the full-resolution PDF is in the earlier post)

Please Log in or Create an account to join the conversation.

  • tommylight
  • tommylight's Avatar Topic Author
  • Away
  • Moderator
  • Moderator
More
28 Jun 2017 19:11 #95139 by tommylight
Replied by tommylight on topic LinuxCnc logo
Awwwww that is cute !
Thank you.

Please Log in or Create an account to join the conversation.

More
28 Jun 2017 19:36 #95145 by cvp83
Replied by cvp83 on topic LinuxCnc logo - 1600x1600 mascot
Here they are, use as you see fit ... all good things should be free.
Attachments:

Please Log in or Create an account to join the conversation.

More
28 Jun 2017 22:15 #95153 by Grotius
Replied by Grotius on topic LinuxCnc logo - 1600x1600 mascot
Why is linux cnc linked with a bird that can not fly and has eyes that are not responding correctly?

Or am i thinking like a sheep?

Please Log in or Create an account to join the conversation.

  • Todd Zuercher
  • Todd Zuercher's Avatar
  • Away
  • Platinum Member
  • Platinum Member
More
29 Jun 2017 11:57 - 29 Jun 2017 11:59 #95164 by Todd Zuercher
Replied by Todd Zuercher on topic LinuxCnc logo - 1600x1600 mascot
The eyes are drawn that way because the artist who drew it thought it looked cute that way. The penguins are just a Linux thing.
Personally I like this one (and the one at the top of the forum) better.
forum.linuxcnc.org/media/kunena/attachments/3190/chips.zip
Last edit: 29 Jun 2017 11:59 by Todd Zuercher.
The following user(s) said Thank You: Doug @ Design8Studio.com

Please Log in or Create an account to join the conversation.

More
29 Jun 2017 12:14 #95166 by XXCoder
Replied by XXCoder on topic LinuxCnc logo
Indeed. The BIG problem with original is that we only has tiny image, with original vector seemly lost. Original post and later modified by me is best one I think imho.

I just does not think super cutesy is best for machining. Especially no safety goggles one!
The following user(s) said Thank You: Doug @ Design8Studio.com

Please Log in or Create an account to join the conversation.

Time to create page: 0.205 seconds
Powered by Kunena Forum