Spindle Step/Dir servo ramp down before stop on M stop command.

More
18 Nov 2021 21:04 - 18 Nov 2021 21:11 #226919 by jpg
(see previous message..)  it is to do this ... attached the file cn test:
Attachments:
Last edit: 18 Nov 2021 21:11 by jpg.

Please Log in or Create an account to join the conversation.

More
18 Nov 2021 22:04 #226923 by tommylight
There has to be a space between install and the file path.
you have
--install/some/folder/somewhere
needs to be
--install /some/folder/somewhere
notice the space after install.

Please Log in or Create an account to join the conversation.

More
18 Nov 2021 22:20 #226927 by jpg
good evening Tommyliht, I had written this:
"sudo halcompile --install/home/prv1224ss/linuxcnc/configs/ma-machine_xyza_en_c/caxis.comp"
Could you tell me what is wrong? Thanks again

Please Log in or Create an account to join the conversation.

More
18 Nov 2021 23:49 #226933 by tommylight

good evening Tommyliht, I had written this:
"sudo halcompile --install/home/prv1224ss/linuxcnc/configs/ma-machine_xyza_en_c/caxis.comp"
Could you tell me what is wrong? Thanks again

Should be
"sudo halcompile --install /home/prv1224ss/linuxcnc/configs/ma-machine_xyza_en_c/caxis.comp"
notice the space here ----^

Please Log in or Create an account to join the conversation.

More
19 Nov 2021 01:48 #226941 by andypugh
It's been a long time. Is this anything to do with the thread title any more?

Please Log in or Create an account to join the conversation.

Time to create page: 0.087 seconds
Powered by Kunena Forum