Forum Header

Mach3 XML and Stepconfig issues.

9 years 6 months ago #91848 by tecno

Replied by tecno on topic Mach3 XML and Stepconfig issues.

Will go down to the shop and try that.

Please Log in or Create an account to join the conversation.

9 years 6 months ago #91850 by tecno

Replied by tecno on topic Mach3 XML and Stepconfig issues.

Added line nothing.

Please Log in or Create an account to join the conversation.

9 years 6 months ago #91851 by tecno

Replied by tecno on topic Mach3 XML and Stepconfig issues.

Please Log in or Create an account to join the conversation.

9 years 6 months ago #91852 by tecno

Replied by tecno on topic Mach3 XML and Stepconfig issues.

Please Log in or Create an account to join the conversation.

9 years 6 months ago #91853 by tecno

Replied by tecno on topic Mach3 XML and Stepconfig issues.

So now we have clockwise F9 working

Please Log in or Create an account to join the conversation.

9 years 6 months ago #91854 by tecno

Replied by tecno on topic Mach3 XML and Stepconfig issues.

Pin 7 is not changing direction, pulses only on pin 6 for steps and 7 to go high or low.
How to change this?

Please Log in or Create an account to join the conversation.

Time to create page: 0.123 seconds