StepConf Wizard 595 topics

Stepper Configuration Wizard for Parallel Port

Forum Header

Subject	Replies / Views	Last Post
stepper motors moving REALLY slowly, stepconf test Topic started 18 Nov 2013 03:46, by Glamplitude Last Post 29 Nov 2013 17:42 by andypugh 1 2	Replies:17 Views:8993	Last Post by andypugh 29 Nov 2013 17:42
CNC Mini Lathe with threading Topic started 19 Nov 2013 10:23, by Davenc Last Post 20 Nov 2013 20:20 by ArcEye	Replies:6 Views:5404	ArcEye Last Post by ArcEye 20 Nov 2013 20:20
StepConf Wizard Test Axis Topic started 07 Nov 2013 03:39, by rako Last Post 09 Nov 2013 03:02 by BigJohnT	Replies:3 Views:2148	Last Post by BigJohnT 09 Nov 2013 03:02
creating a pre-set Topic started 08 Oct 2013 02:12, by somenewguy Last Post 08 Nov 2013 07:27 by somenewguy	Replies:9 Views:3074	somenewguy Last Post by somenewguy 08 Nov 2013 07:27
High frequency noise from motors Topic started 01 Nov 2013 20:49, by ATom_1977 Last Post 04 Nov 2013 18:56 by Rick G	Replies:8 Views:2663	Last Post by Rick G 04 Nov 2013 18:56
LinuxCNC will not run after StepConf Topic started 01 Oct 2013 08:58, by crownGuy Last Post 08 Oct 2013 16:48 by ArcEye	Replies:9 Views:2954	ArcEye Last Post by ArcEye 08 Oct 2013 16:48
different speed and acceleration settings on axis Topic started 04 Oct 2013 04:21, by brentf_1 Last Post 04 Oct 2013 04:48 by BigJohnT	Replies:1 Views:2197	Last Post by BigJohnT 04 Oct 2013 04:48
problems with stepcon Topic started 27 Sep 2013 03:02, by dsb1 Last Post 04 Oct 2013 01:49 by BigJohnT 1 2 3	Replies:22 Views:8440	Last Post by BigJohnT 04 Oct 2013 01:49
L297 controler and StepConf Topic started 10 Sep 2013 23:07, by probamo Last Post 03 Oct 2013 03:05 by probamo 1 2	Replies:18 Views:11k	Last Post by probamo 03 Oct 2013 03:05
LinuxCNC, DQ542MA driver and DB25-1205 BOB Topic started 15 Aug 2013 19:54, by awes Last Post 27 Sep 2013 01:55 by fannlow	Replies:9 Views:21.6k	fannlow Last Post by fannlow 27 Sep 2013 01:55
Laptop MSI - COM1 port Topic started 20 Sep 2013 12:42, by probamo Last Post 20 Sep 2013 13:02 by cmorley	Replies:3 Views:2090	cmorley Last Post by cmorley 20 Sep 2013 13:02
StepConf Wizard INI file Topic started 29 Jan 2012 18:24, by garymcrobertpdx Last Post 18 Sep 2013 18:49 by BigJohnT	Replies:6 Views:5742	Last Post by BigJohnT 18 Sep 2013 18:49
Help with tranlating puls/dir control signals Topic started 10 Sep 2013 06:24, by jandansson Last Post 10 Sep 2013 14:33 by cncbasher	Replies:6 Views:3009	cncbasher Last Post by cncbasher 10 Sep 2013 14:33
Driver Timing Settings - Need Help Topic started 05 Sep 2013 09:15, by kb9jlo Last Post 05 Sep 2013 21:30 by kb9jlo	Replies:2 Views:2502	kb9jlo Last Post by kb9jlo 05 Sep 2013 21:30
another question about Max Jitter, Latency Test Topic started 29 Aug 2013 12:34, by nquantum Last Post 01 Sep 2013 12:28 by nquantum	Replies:6 Views:15.8k	nquantum Last Post by nquantum 01 Sep 2013 12:28
StepConf Axis Test not working Topic started 16 Aug 2013 09:33, by abrambleninja Last Post 17 Aug 2013 15:17 by cncbasher	Replies:6 Views:3513	cncbasher Last Post by cncbasher 17 Aug 2013 15:17
[SOLVED] Weird problem with travel table Topic started 10 Aug 2013 02:00, by minitreintje Last Post 11 Aug 2013 00:30 by minitreintje	Replies:5 Views:2749	minitreintje Last Post by minitreintje 11 Aug 2013 00:30
Newbie from the UK need a little assistance Topic started 13 May 2013 18:20, by Gr8funTargets Last Post 06 Aug 2013 22:01 by Gr8funTargets 1 2 3	Replies:27 Views:11.4k	Last Post by Gr8funTargets 06 Aug 2013 22:01
Gecko driver timings in stepconf wizard Topic started 01 Aug 2013 02:41, by spike Last Post 02 Aug 2013 04:20 by spike	Replies:5 Views:2935	spike Last Post by spike 02 Aug 2013 04:20
How to configure Z-axis? Topic started 21 Jul 2013 19:51, by Hodor Last Post 22 Jul 2013 23:53 by Hodor	Replies:2 Views:3286	Hodor Last Post by Hodor 22 Jul 2013 23:53

Time to create page: 0.146 seconds