General LinuxCNC Questions 6119 topics

Questions about LinuxCNC

Subject	Replies / Views	Last Post
2.7.15 Topic started 12 Feb 2020 11:51, by jazial Last Post 04 Mar 2020 14:00 by jazial 1 2 3	Replies:21 Views:4470	jazial Last Post by jazial 04 Mar 2020 14:00
Very new: will I be able to communicate with this controller board? Topic started 23 Feb 2020 18:02, by kwende Last Post 03 Mar 2020 18:03 by BeagleBrainz 1 2	Replies:12 Views:5705	Last Post by BeagleBrainz 03 Mar 2020 18:03
Dig IOs visible on HAL (shows Set and Reset by M64,M65) but no physical change Topic started 02 Mar 2020 15:41, by Schneckerich_63 Last Post 03 Mar 2020 14:22 by bbsr_5a	Replies:1 Views:767	bbsr_5a Last Post by bbsr_5a 03 Mar 2020 14:22
There's one in every group... Topic started 05 Nov 2019 18:39, by kopcicle Last Post 02 Mar 2020 22:06 by gtoal 1 2	Replies:11 Views:6134	gtoal Last Post by gtoal 02 Mar 2020 22:06
Vismach Coordinate Systems Topic started 18 Feb 2020 11:21, by drugo_lebowski85 Last Post 02 Mar 2020 13:52 by andypugh	Replies:4 Views:2117	Last Post by andypugh 02 Mar 2020 13:52
[solved] Python Remap: How to access current a,b and c positions? Topic started 01 Mar 2020 16:19, by Aciera Last Post 02 Mar 2020 06:45 by thang	Replies:3 Views:1180	thang Last Post by thang 02 Mar 2020 06:45
How can i run a program on my plasma and control the z axis separately/manually Topic started 01 Mar 2020 03:23, by jody0048 Last Post 01 Mar 2020 09:46 by tommylight	Replies:4 Views:1065	Last Post by tommylight 01 Mar 2020 09:46
pncconf from 2.8.0~pre1 vs pncconf from 2.8.0.pre1.4891.gadf1eff73 Topic started 29 Feb 2020 10:13, by BeagleBrainz Last Post 29 Feb 2020 22:24 by cmorley	Replies:8 Views:1465	cmorley Last Post by cmorley 29 Feb 2020 22:24
Turn on and off "axis.N.amp−enable−out" Topic started 28 Feb 2020 03:35, by snujcnc Last Post 28 Feb 2020 19:10 by Mike_Eitel	Replies:4 Views:1671	Last Post by Mike_Eitel 28 Feb 2020 19:10
Thoughts on using a standard low-latency Kernel? Topic started 13 Feb 2018 01:42, by blazini36 Last Post 28 Feb 2020 17:16 by pmconsulting	Replies:7 Views:2277	pmconsulting Last Post by pmconsulting 28 Feb 2020 17:16
Homming In Automatic Mode ? Topic started 28 Feb 2020 03:29, by snujcnc Last Post 28 Feb 2020 08:23 by snujcnc	Replies:2 Views:984	Last Post by snujcnc 28 Feb 2020 08:23
mesa 7i76E+7i85S+ linear encoder st1278 heidenhain Topic started 12 Feb 2020 21:45, by Kyrst Last Post 27 Feb 2020 13:10 by andypugh 1 2	Replies:10 Views:3571	Last Post by andypugh 27 Feb 2020 13:10
What files do I need to keep when changing computers? Topic started 14 Feb 2020 02:14, by mooser Last Post 27 Feb 2020 00:21 by andypugh	Replies:3 Views:1107	Last Post by andypugh 27 Feb 2020 00:21
Modern/compact linuxcnc setup Topic started 12 Feb 2020 03:08, by maghis Last Post 26 Feb 2020 23:30 by andypugh 1 2	Replies:11 Views:3016	Last Post by andypugh 26 Feb 2020 23:30
Talking to Trinamic tmc2160 drivers Topic started 11 Feb 2020 15:49, by BryceJ Last Post 26 Feb 2020 19:36 by Mike_Eitel	Replies:4 Views:2510	Last Post by Mike_Eitel 26 Feb 2020 19:36
Running Mcode or O subroutine from classicladder Topic started 09 Feb 2020 12:34, by james891 Last Post 26 Feb 2020 14:00 by Todd Zuercher	Replies:3 Views:1032	Last Post by Todd Zuercher 26 Feb 2020 14:00
connecting and setting up a Z touch plate with 7i76e Topic started 25 Feb 2020 08:51, by morhaz Last Post 25 Feb 2020 17:57 by JohnnyCNC	Replies:5 Views:1938	Last Post by JohnnyCNC 25 Feb 2020 17:57
new to linuxcnc and building a plasma table Topic started 10 Feb 2020 14:02, by jay1st Last Post 24 Feb 2020 08:47 by jay1st 1 2 3	Replies:25 Views:4399	Last Post by jay1st 24 Feb 2020 08:47
Z-Axis Problem Topic started 18 Feb 2020 16:47, by NewToRouting Last Post 20 Feb 2020 01:24 by JohnnyCNC	Replies:2 Views:921	Last Post by JohnnyCNC 20 Feb 2020 01:24
REMAP function doesn't work Topic started 27 Jan 2020 20:17, by aleksamc Last Post 19 Feb 2020 16:22 by andypugh 1 2	Replies:13 Views:4233	Last Post by andypugh 19 Feb 2020 16:22

Time to create page: 1.098 seconds