1. Configuring LinuxCNC
  3. Basic Configuration
  5. Setup for plasma cutting need help

Setup for plasma cutting need help

More
14 Jul 2012 23:17 #21954 by ricky_a
Setup for plasma cutting need help was created by ricky_a
How do I set linuxcnc for plasma cutting

Please Log in or Create an account to join the conversation.

More
15 Jul 2012 11:02 #21959 by BigJohnT
Replied by BigJohnT on topic Re:Setup for plasma cutting need help
I use m3 and m5 on mine.

John

Please Log in or Create an account to join the conversation.

More
15 Jul 2012 20:34 #21969 by ricky_a
Replied by ricky_a on topic Re:Setup for plasma cutting need help
where do I find it

Please Log in or Create an account to join the conversation.

More
15 Jul 2012 22:22 #21973 by BigJohnT
Replied by BigJohnT on topic Re:Setup for plasma cutting need help
linuxcnc.org/docs/html/gcode/m-code.html

and you need to set S to > 0.

John

Please Log in or Create an account to join the conversation.

More
16 Jul 2012 10:23 #21988 by ricky_a
Replied by ricky_a on topic Re:Setup for plasma cutting need help
Okay but what is m3 and m5.

Please Log in or Create an account to join the conversation.

More
16 Jul 2012 10:37 #21989 by Rick G
Replied by Rick G on topic Re:Setup for plasma cutting need help
Turn spindle on or off, take a look here...

www.linuxcnc.org/docs/html/gcode.html

Rick G

Please Log in or Create an account to join the conversation.

More
16 Jul 2012 14:47 #21995 by ricky_a
Replied by ricky_a on topic Re:Setup for plasma cutting need help
This is what i want.

wiki.linuxcnc.org/cgi-bin/wiki.pl?GantryPlasmaMachine#Software

Please Log in or Create an account to join the conversation.

More
16 Jul 2012 14:47 #21996 by ricky_a
Replied by ricky_a on topic Re:Setup for plasma cutting need help
:laugh:
File Attachment:
Attachments:

Please Log in or Create an account to join the conversation.

More
16 Jul 2012 14:51 - 16 Jul 2012 14:55 #21998 by ricky_a
Replied by ricky_a on topic Re:Setup for plasma cutting need help
This is what i have
File Attachment:
Attachments:
Last edit: 16 Jul 2012 14:55 by ricky_a.

Please Log in or Create an account to join the conversation.

More
16 Jul 2012 14:53 #21999 by ricky_a
Replied by ricky_a on topic Re:Setup for plasma cutting need help
:laugh:

Please Log in or Create an account to join the conversation.

  1. Configuring LinuxCNC
  3. Basic Configuration
  5. Setup for plasma cutting need help
Time to create page: 0.149 seconds
Powered by Kunena Forum