Gildemeister NEF 480 Retrofit

  • anfänger
  • anfänger's Avatar Topic Author
  • Offline
  • Platinum Member
  • Platinum Member
More
01 Jan 2021 19:00 #193747 by anfänger
Replied by anfänger on topic Gildemeister NEF 480 Retrofit
So installed linuxcnc today. It's not the final monitor but I wanted to start


latencies look okish without W-Lan and disabled audio

also flipped the cabinet around, now it's right siede up.
File Attachment:


After taking a look at the back:

File Attachment:


I decided ti scrap everything but the hart plugs even the main switch will go. So its waiting again and cleaning a lot of cleaning
The following user(s) said Thank You: chimeno, tommylight, Aciera

Please Log in or Create an account to join the conversation.

  • anfänger
  • anfänger's Avatar Topic Author
  • Offline
  • Platinum Member
  • Platinum Member
More
02 Jan 2021 16:05 #193847 by anfänger
Replied by anfänger on topic Gildemeister NEF 480 Retrofit
emptied the cabinet today
work in progress:




and in the end:





and here is all the stuff I removed:






nest is cleaning and then building it up again.
The following user(s) said Thank You: chimeno, tommylight

Please Log in or Create an account to join the conversation.

  • tommylight
  • tommylight's Avatar
  • Away
  • Moderator
  • Moderator
More
02 Jan 2021 16:20 #193849 by tommylight
Replied by tommylight on topic Gildemeister NEF 480 Retrofit
Point of no return! :)
Yummy, Knipex ! :woohoo:

Please Log in or Create an account to join the conversation.

  • anfänger
  • anfänger's Avatar Topic Author
  • Offline
  • Platinum Member
  • Platinum Member
More
02 Jan 2021 17:18 #193857 by anfänger
Replied by anfänger on topic Gildemeister NEF 480 Retrofit
Yea best pliers I have

Please Log in or Create an account to join the conversation.

  • tommylight
  • tommylight's Avatar
  • Away
  • Moderator
  • Moderator
More
02 Jan 2021 19:06 #193874 by tommylight
Replied by tommylight on topic Gildemeister NEF 480 Retrofit
I have pretty much everything i could get my hand on, from Austria and now locally. Also have 2 sets of everything Wiha.
Now locally means there is a new shopping centre opened about 2KM from my house that has Knipex stuff, got the the Cobra, went to pay for it and the cashier went numb for about two minutes looking at the price on the screen and at the pliers, called one of the managers and told him that the price is wrong! At that point i started laughing and told here that the price is OK, she replied: but there are same pliers for under 5 euro! :)
The price was 32.5 Euro for the middle ones, 30cm i think.
It has become an obsession ! :)

Please Log in or Create an account to join the conversation.

  • anfänger
  • anfänger's Avatar Topic Author
  • Offline
  • Platinum Member
  • Platinum Member
More
02 Jan 2021 20:10 #193885 by anfänger
Replied by anfänger on topic Gildemeister NEF 480 Retrofit
They are worth it, I have some tools but for pliers knpiex are worth every cent. I love their parallel one and the cobolt.
The rest ist al lot of Unior and some Wera.

For me my workshop is just a hobby (now) so everything is a useless obsession :D and a lot of fun
The following user(s) said Thank You: tommylight

Please Log in or Create an account to join the conversation.

  • anfänger
  • anfänger's Avatar Topic Author
  • Offline
  • Platinum Member
  • Platinum Member
More
04 Jan 2021 18:22 #194061 by anfänger
Replied by anfänger on topic Gildemeister NEF 480 Retrofit
Servos and drives arrived today. also some small parts. I think till the weekend I have enough to start building up again

The following user(s) said Thank You: tommylight

Please Log in or Create an account to join the conversation.

  • tommylight
  • tommylight's Avatar
  • Away
  • Moderator
  • Moderator
More
04 Jan 2021 19:36 #194065 by tommylight
Replied by tommylight on topic Gildemeister NEF 480 Retrofit
Santa ? :)

Please Log in or Create an account to join the conversation.

  • anfänger
  • anfänger's Avatar Topic Author
  • Offline
  • Platinum Member
  • Platinum Member
More
05 Jan 2021 06:55 #194121 by anfänger
Replied by anfänger on topic Gildemeister NEF 480 Retrofit
Yea he will have to work for some little longer.
For today and tomorrow more parts will arrive.

And I found a fitting tailstock.
The following user(s) said Thank You: tommylight

Please Log in or Create an account to join the conversation.

  • anfänger
  • anfänger's Avatar Topic Author
  • Offline
  • Platinum Member
  • Platinum Member
More
06 Jan 2021 19:51 #194272 by anfänger
Replied by anfänger on topic Gildemeister NEF 480 Retrofit
another boring picture:

File Attachment:
Ohne Titel

the VFD, touch screen and the contactors arrived.
Now only the motor protectors and filter is missing and I am running out of excuses not to start assembling
The following user(s) said Thank You: tommylight

Please Log in or Create an account to join the conversation.

Moderators: piasdom
Time to create page: 0.140 seconds
Powered by Kunena Forum