Esab Ultrarex UXD-P2000 Upgrade Project

Ok got that. Good luck with those custom builds and thanks again for the precious help

Hi guys ! Long time no see !
Back to this project after a long pause, a new mesa 7i77 board and some wiring mess cleaning. We managed to do some successful test cuts. The machine did even cut some 12mm sheets last Friday. But we still have issues with height control as the torch gets too close to the materiel and this messes up the cut and the torch tip. I'm uploading some test cut videos and will upload some more in order to have your feedback on height control and correct voltage values. Big Thanks for Tommy for his great help with this project. @Tommy, hope you're doing well and enjoying your projects !
Will update with youtube links soon.

Video links:

Excellent to see stuff moving!
The torch voltage seems low but that is just a calibration issue.

Is there a reason why you are not using the qtplasmac config? 
linuxcnc.org/docs/stable/html/plasma/qtplasmac.html
Or did this project start so long ago it didn't exist?