General LinuxCNC Questions 6084 topics

Questions about LinuxCNC

Subject	Replies / Views	Last Post
BOXFORD 125 TLC Tool Changer Setup Topic started 30 Dec 2018 13:03, by garulus Last Post 17 Nov 2024 11:52 by BoxCNC 1 2 3 ... 6	Replies:55 Views:12.1k	BoxCNC Last Post by BoxCNC 17 Nov 2024 11:52
7i96s Spindle Rpm Measure with Proximity Sensor Topic started 16 Nov 2024 19:01, by turan Last Post 16 Nov 2024 19:41 by PCW	Replies:3 Views:499	Last Post by PCW 16 Nov 2024 19:41
Needing some video tutorials Topic started 16 Nov 2024 13:36, by fabianpruitt Last Post 16 Nov 2024 14:54 by Aciera	Replies:1 Views:559	Last Post by Aciera 16 Nov 2024 14:54
Suggestion for a PCI EPP card for 7i43 Topic started 06 Nov 2024 10:42, by juliankoenig87 Last Post 15 Nov 2024 17:40 by PCW 1 2 3 ... 5	Replies:43 Views:3626	Last Post by PCW 15 Nov 2024 17:40
Multiple controller boards Topic started 13 Nov 2024 20:17, by AA Last Post 14 Nov 2024 17:55 by Tinine 1 2	Replies:10 Views:1717	Tinine Last Post by Tinine 14 Nov 2024 17:55
New basic setup recommendations Topic started 10 Nov 2024 19:09, by Routerworks Last Post 14 Nov 2024 15:14 by Routerworks 1 2	Replies:14 Views:1821	Routerworks Last Post by Routerworks 14 Nov 2024 15:14
Raspberry PI4, MESA 7I96S problems Topic started 13 May 2023 09:30, by vidgabor@gmail.com Last Post 13 Nov 2024 02:15 by PCW 1 2	Replies:11 Views:3511	Last Post by PCW 13 Nov 2024 02:15
gmoccapy z height after hitting start Topic started 19 Sep 2024 23:12, by crazycajun Last Post 12 Nov 2024 12:29 by Aciera	Replies:7 Views:686	Last Post by Aciera 12 Nov 2024 12:29
Linuxcnc crashing randomly when pressing buttons Topic started 11 Nov 2024 18:23, by domse Last Post 11 Nov 2024 19:25 by PCW	Replies:1 Views:665	Last Post by PCW 11 Nov 2024 19:25
After switching from wheezy to Debian 12 only X axis runs smooth (sometimes) Topic started 10 Nov 2024 18:45, by denhen89 Last Post 11 Nov 2024 18:08 by denhen89	Replies:6 Views:646	Last Post by denhen89 11 Nov 2024 18:08
Help with source list Topic started 11 Nov 2024 06:26, by flexbex Last Post 11 Nov 2024 13:15 by tommylight	Replies:1 Views:550	Last Post by tommylight 11 Nov 2024 13:15
PNCconfig error Topic started 16 Oct 2024 02:06, by okielaxplyr Last Post 10 Nov 2024 17:58 by okielaxplyr	Replies:8 Views:753	okielaxplyr Last Post by okielaxplyr 10 Nov 2024 17:58
[SOLVED] Rigid tapping problem - tristate_bit and index-enable? Topic started 09 Nov 2024 05:36, by spumco Last Post 10 Nov 2024 01:17 by spumco 1 2	Replies:13 Views:2130	spumco Last Post by spumco 10 Nov 2024 01:17
Which LinuxCNC version for a MESA 7i96s in 2024? Topic started 08 Nov 2024 11:14, by Adam_C Last Post 09 Nov 2024 23:42 by Adam_C	Replies:3 Views:1018	Adam_C Last Post by Adam_C 09 Nov 2024 23:42
Retro fitting Topic started 09 Nov 2024 16:02, by PF2Design Last Post 09 Nov 2024 16:13 by tommylight	Replies:1 Views:689	Last Post by tommylight 09 Nov 2024 16:13
LinuxCNC Error Topic started 05 Nov 2024 06:23, by Micro2000 Last Post 08 Nov 2024 19:01 by Micro2000 1 2 3	Replies:20 Views:2410	Micro2000 Last Post by Micro2000 08 Nov 2024 19:01
Execute G-code when triggered by an external input (on parallel port input pin) Topic started 08 Nov 2024 09:34, by sk_linuxcnc Last Post 08 Nov 2024 11:41 by sk_linuxcnc	Replies:2 Views:646	sk_linuxcnc Last Post by sk_linuxcnc 08 Nov 2024 11:41
/usr/share/linuxcnc/hallib/lathe.hal error Topic started 06 Nov 2024 04:56, by Levi Last Post 07 Nov 2024 22:48 by Levi	Replies:2 Views:680	Levi Last Post by Levi 07 Nov 2024 22:48
Mesaflash not possible - no 7i96s card found Topic started 06 Nov 2024 21:53, by sin-do-re Last Post 07 Nov 2024 15:15 by PCW	Replies:3 Views:669	Last Post by PCW 07 Nov 2024 15:15
Mint 22 with stock kernel preempt=dynamic works flawlessly with 7i76e Topic started 06 Nov 2024 10:51, by zack Last Post 06 Nov 2024 15:58 by zack	Replies:4 Views:962	Last Post by zack 06 Nov 2024 15:58

Time to create page: 0.398 seconds