Basic Configuration 1395 topics

A place to discuss basic configurations like probe input, homing etc.

Subject	Replies / Views	Last Post
Jog axis after limit switch reached Topic started 21 Jan 2015 21:27, by TopperH Last Post 21 Jan 2015 21:49 by ArcEye	Replies:1 Views:1356	ArcEye Last Post by ArcEye 21 Jan 2015 21:49
jogging non-axis stepgen Topic started 03 Jan 2015 02:13, by Badger Last Post 06 Jan 2015 08:17 by andypugh	Replies:3 Views:1444	Last Post by andypugh 06 Jan 2015 08:17
State of pin "TRUE' at startup??? Topic started 30 Dec 2014 01:55, by mmt Last Post 06 Jan 2015 01:28 by andypugh	Replies:2 Views:1204	Last Post by andypugh 06 Jan 2015 01:28
Coolant on in axis linked to parport 1 Topic started 30 Dec 2014 02:02, by mmt Last Post 30 Dec 2014 05:52 by cmorley	Replies:1 Views:1148	cmorley Last Post by cmorley 30 Dec 2014 05:52
LPT Spindel PWM Different Speed With M3 and M4 Topic started 26 Dec 2014 23:00, by juergen-home Last Post 27 Dec 2014 03:09 by juergen-home	Replies:2 Views:2086	juergen-home Last Post by juergen-home 27 Dec 2014 03:09
upgraded from 2.5 to 2.6 tuning issues Topic started 18 Dec 2014 10:31, by clkeck1 Last Post 20 Dec 2014 03:48 by clkeck1 1 2	Replies:13 Views:3329	clkeck1 Last Post by clkeck1 20 Dec 2014 03:48
corner lock Topic started 01 Nov 2014 16:47, by billykid Last Post 18 Dec 2014 09:48 by tommylight	Replies:5 Views:1610	Last Post by tommylight 18 Dec 2014 09:48
Dual probes using NC and NO inputs Topic started 16 Dec 2014 07:57, by Delron Last Post 17 Dec 2014 00:51 by Delron	Replies:4 Views:1636	Delron Last Post by Delron 17 Dec 2014 00:51
Z axis configuration issue Topic started 09 Dec 2014 06:23, by allenwg2005 Last Post 11 Dec 2014 07:06 by allenwg2005 1 2	Replies:10 Views:5197	Last Post by allenwg2005 11 Dec 2014 07:06
Y AXIS Clone with Xylotex BBB_DB25 Topic started 09 Dec 2014 00:56, by hjohnw Last Post 09 Dec 2014 01:01 by PCW	Replies:1 Views:1732	Last Post by PCW 09 Dec 2014 01:01
combined x/y axis home switch Topic started 05 Dec 2014 05:34, by cableman Last Post 07 Dec 2014 06:07 by Todd Zuercher	Replies:3 Views:2585	Last Post by Todd Zuercher 07 Dec 2014 06:07
y axis negative issue Topic started 06 Dec 2014 11:45, by IDAK Last Post 06 Dec 2014 23:45 by IDAK	Replies:3 Views:1903	IDAK Last Post by IDAK 06 Dec 2014 23:45
x y accuracy Topic started 04 Dec 2014 05:28, by paulstenlund Last Post 04 Dec 2014 20:01 by BigJohnT	Replies:2 Views:1280	Last Post by BigJohnT 04 Dec 2014 20:01
Super-PID spindle speed feedback Topic started 21 Nov 2014 08:29, by Delron Last Post 26 Nov 2014 10:01 by Delron 1 2	Replies:12 Views:5838	Delron Last Post by Delron 26 Nov 2014 10:01
Wiring limits 5i25/7i76 Topic started 23 Nov 2014 10:50, by jonesturf Last Post 24 Nov 2014 20:25 by BigJohnT	Replies:6 Views:1871	Last Post by BigJohnT 24 Nov 2014 20:25
Can't clone a axis to follow x axis Topic started 14 Nov 2014 04:08, by invntr Last Post 24 Nov 2014 02:23 by hjohnw	Replies:3 Views:1776	hjohnw Last Post by hjohnw 24 Nov 2014 02:23
CNC Router Parts Machine Problem Topic started 15 Nov 2014 11:32, by invntr Last Post 17 Nov 2014 17:32 by ArcEye	Replies:6 Views:2960	ArcEye Last Post by ArcEye 17 Nov 2014 17:32
Estop wiring on a parallel BOB Topic started 13 Nov 2014 20:07, by cparsons Last Post 14 Nov 2014 00:58 by cncbasher	Replies:1 Views:2175	cncbasher Last Post by cncbasher 14 Nov 2014 00:58
Stepper not stopping on home or limit switches Topic started 12 Nov 2014 05:27, by FernV Last Post 13 Nov 2014 03:21 by FernV	Replies:3 Views:3068	Last Post by FernV 13 Nov 2014 03:21
use motherboard parallel for additional inputs? Topic started 03 Nov 2014 10:32, by garylogan Last Post 10 Nov 2014 15:22 by ArcEye	Replies:4 Views:1730	ArcEye Last Post by ArcEye 10 Nov 2014 15:22

Time to create page: 0.249 seconds