PnCConf Wizard 657 topics

Point n Click Configuration tool for Mesa Cards

Subject	Replies / Views	Last Post
Pncconf error when choose 5i25 with 5.25_7i77_7i74.bin flashed Topic started 03 Oct 2019 19:52, by pgruszel Last Post 03 Oct 2019 23:27 by tommylight	Replies:8 Views:1399	Last Post by tommylight 03 Oct 2019 23:27
Using 7i78 step generators with 7i76e Topic started 27 Sep 2019 00:55, by 5r100w Last Post 02 Oct 2019 04:59 by andypugh	Replies:4 Views:1543	Last Post by andypugh 02 Oct 2019 04:59
pncconf error on Buster and 2.8.0~pre with 7i76e (Version: UNAVAILABLE) Topic started 30 Sep 2019 03:29, by acondit Last Post 30 Sep 2019 20:36 by cmorley	Replies:8 Views:1531	cmorley Last Post by cmorley 30 Sep 2019 20:36
Just want to thanks the people making PnCConf Topic started 25 Sep 2019 15:50, by atrox1333 Last Post 28 Sep 2019 07:39 by tommylight	Replies:3 Views:1227	Last Post by tommylight 28 Sep 2019 07:39
Spindle configuration for Mesa 5i25 + 7i76 Topic started 21 Sep 2019 15:30, by TheChosenOne Last Post 22 Sep 2019 15:12 by TheChosenOne	Replies:9 Views:2257	TheChosenOne Last Post by TheChosenOne 22 Sep 2019 15:12
Question on recent SPINDLE_9 change Topic started 11 Sep 2019 15:07, by shasse Last Post 12 Sep 2019 03:26 by cmorley	Replies:5 Views:1336	cmorley Last Post by cmorley 12 Sep 2019 03:26
PNCConf error when clicking Done Topic started 05 Sep 2019 21:13, by LuisGZ Last Post 06 Sep 2019 22:51 by LuisGZ 1 2	Replies:11 Views:3399	Last Post by LuisGZ 06 Sep 2019 22:51
5I24 dident show in pncconf wisard Topic started 28 Aug 2019 19:05, by kavindu1 Last Post 28 Aug 2019 23:19 by andypugh	Replies:1 Views:1317	Last Post by andypugh 28 Aug 2019 23:19
Debian 9 PnCConf Wizard error Topic started 09 Aug 2019 09:27, by Nkonnect Last Post 09 Aug 2019 13:29 by PCW	Replies:4 Views:1441	Last Post by PCW 09 Aug 2019 13:29
firmware won't write on plug-n-go Topic started 23 Jul 2019 04:21, by rwistort Last Post 24 Jul 2019 03:45 by rwistort	Replies:4 Views:1719	rwistort Last Post by rwistort 24 Jul 2019 03:45
7I76E Cant Get Steppers Moving Topic started 14 Jul 2019 01:18, by EXTRA370 Last Post 14 Jul 2019 21:37 by tommylight 1 2	Replies:11 Views:4612	Last Post by tommylight 14 Jul 2019 21:37
New Mesa config, only Y axis is working Topic started 13 Jul 2019 03:06, by MattyZee Last Post 13 Jul 2019 07:17 by pl7i92	Replies:4 Views:1451	Last Post by pl7i92 13 Jul 2019 07:17
Test LinuxCNC without motors and encoders connected Topic started 06 Jun 2019 18:48, by Peterdeleu Last Post 03 Jul 2019 17:56 by Peterdeleu 1 2 3 ... 8	Replies:73 Views:12.5k	Peterdeleu Last Post by Peterdeleu 03 Jul 2019 17:56
7i77 Analog Outputs 0&5 has voltage Topic started 22 Jun 2019 16:33, by JB-Motoring Last Post 22 Jun 2019 18:17 by JB-Motoring	Replies:6 Views:1713	JB-Motoring Last Post by JB-Motoring 22 Jun 2019 18:17
Spindle not being enabled when running G-Code Topic started 09 Jun 2019 21:19, by HueyHQ Last Post 11 Jun 2019 03:24 by HueyHQ	Replies:6 Views:1995	Last Post by HueyHQ 11 Jun 2019 03:24
7I92M/7I77 linuxcnc Startup Error? Topic started 25 May 2019 15:39, by CNCDoc Last Post 25 May 2019 19:53 by PCW 1 2	Replies:13 Views:4343	Last Post by PCW 25 May 2019 19:53
PNCConf Config (Think Im missing something) Topic started 12 May 2019 05:35, by Type_Zero_Design Last Post 24 May 2019 02:21 by cmorley 1 2	Replies:15 Views:5485	cmorley Last Post by cmorley 24 May 2019 02:21
axis/tune error Topic started 11 May 2019 09:02, by Erikcnc Last Post 13 May 2019 17:34 by PCW 1 2	Replies:11 Views:3291	Last Post by PCW 13 May 2019 17:34
Support for 7i95 & 7i97? Topic started 10 May 2019 15:08, by jj80909 Last Post 10 May 2019 15:24 by Todd Zuercher	Replies:1 Views:1727	Last Post by Todd Zuercher 10 May 2019 15:24
5i25 + 7i76D Topic started 08 May 2019 13:49, by srini Last Post 09 May 2019 04:58 by srini	Replies:2 Views:1464	srini Last Post by srini 09 May 2019 04:58

Time to create page: 0.169 seconds