Basic Configuration 1217 topics

A place to discuss basic configurations like probe input, homing etc.

Subject	Replies / Views	Last Post
halui.spindle−override.counts - change every 10% Topic started 28 Oct 2019 21:20, by Cynas Last Post 29 Oct 2019 16:17 by Cynas	Replies:8 Views:1915	Cynas Last Post by Cynas 29 Oct 2019 16:17
how to probe big tools with linuxcnc? Topic started 29 Oct 2019 13:52, by ahhkoch Last Post 29 Oct 2019 14:55 by pl7i92	Replies:1 Views:1117	Last Post by pl7i92 29 Oct 2019 14:55
RS485 Communication Problem with HY Inverter Topic started 21 Sep 2019 16:27, by macsddau Last Post 26 Oct 2019 21:09 by andypugh	Replies:7 Views:3452	Last Post by andypugh 26 Oct 2019 21:09
Need to Invert Pin for Latching Estop Topic started 19 Oct 2019 21:10, by MakingStuff Last Post 19 Oct 2019 23:53 by MakingStuff	Replies:2 Views:1965	Last Post by MakingStuff 19 Oct 2019 23:53
Z homing touch plate - hardware/software input Topic started 09 Sep 2019 21:15, by randypetersen Last Post 18 Oct 2019 13:08 by andypugh	Replies:8 Views:2127	Last Post by andypugh 18 Oct 2019 13:08
Servo adjust with encoder feedback Topic started 09 Oct 2019 19:26, by chris@cnc Last Post 13 Oct 2019 14:58 by PCW	Replies:9 Views:3243	Last Post by PCW 13 Oct 2019 14:58
How to configure second parallel port pins as input only Topic started 05 Oct 2019 01:40, by nour Last Post 06 Oct 2019 21:48 by tommylight 1 2	Replies:10 Views:4257	Last Post by tommylight 06 Oct 2019 21:48
Making a new non-simulated configuration Topic started 02 Oct 2019 22:42, by Scot Last Post 04 Oct 2019 01:53 by andypugh 1 2	Replies:11 Views:3265	Last Post by andypugh 04 Oct 2019 01:53
Call GCode from a shell Script Topic started 29 Sep 2019 13:47, by amiba Last Post 03 Oct 2019 00:49 by andypugh	Replies:7 Views:2459	Last Post by andypugh 03 Oct 2019 00:49
Homing sequence. Topic started 02 Oct 2019 23:47, by usert_l Last Post 02 Oct 2019 23:59 by PCW	Replies:1 Views:1870	Last Post by PCW 02 Oct 2019 23:59
DRO innacuracy. Why would the DRO not reach the commanded position? Topic started 01 Oct 2019 19:12, by Scot Last Post 02 Oct 2019 21:06 by Scot 1 2 3	Replies:26 Views:5169	Scot Last Post by Scot 02 Oct 2019 21:06
Parallel port problem. Topic started 24 Sep 2019 07:12, by TheFabricatorAG Last Post 30 Sep 2019 06:30 by pl7i92	Replies:6 Views:1399	Last Post by pl7i92 30 Sep 2019 06:30
Huanyang VFD Topic started 28 Sep 2019 18:04, by Gaunt1969 Last Post 29 Sep 2019 01:35 by Gaunt1969	Replies:5 Views:1563	Gaunt1969 Last Post by Gaunt1969 29 Sep 2019 01:35
Reading from digital inputs from two cards 7i64 connected to 6i25 throught 7i74 Topic started 27 Sep 2019 09:57, by pgruszel Last Post 27 Sep 2019 18:24 by PCW 1 2	Replies:11 Views:3198	Last Post by PCW 27 Sep 2019 18:24
Limit switches not working Topic started 26 Sep 2019 16:38, by bobhare Last Post 27 Sep 2019 17:41 by bobhare	Replies:3 Views:1180	bobhare Last Post by bobhare 27 Sep 2019 17:41
Real world output is WAAAY off! Topic started 24 Sep 2019 22:38, by Scot Last Post 26 Sep 2019 01:06 by Scot	Replies:7 Views:1349	Scot Last Post by Scot 26 Sep 2019 01:06
No motor reaction Topic started 23 Sep 2019 21:11, by Scot Last Post 24 Sep 2019 14:58 by bevins	Replies:5 Views:1271	Last Post by bevins 24 Sep 2019 14:58
Estop and single axis configuratoin Topic started 21 Sep 2019 20:24, by Scot Last Post 22 Sep 2019 07:17 by Scot	Replies:2 Views:1284	Scot Last Post by Scot 22 Sep 2019 07:17
change configs from mm to inches Topic started 14 Sep 2019 08:36, by travis036 Last Post 14 Sep 2019 21:51 by travis036	Replies:9 Views:2230	Last Post by travis036 14 Sep 2019 21:51
Can you contol a servo thru the cheap breakout card? Topic started 08 Sep 2019 12:03, by Leon82 Last Post 14 Sep 2019 17:22 by andypugh 1 2	Replies:12 Views:3273	Last Post by andypugh 14 Sep 2019 17:22

Time to create page: 0.243 seconds