Plasmac 717 topics

A place to ask questions about the Plasmac interface

Subject	Replies / Views	Last Post
qtplasmac (Operation Error: hm2/hm2_7i76e.0:) in middle of cut Topic started 28 Jun 2024 23:57, by RMJ fabrication Last Post 01 Nov 2024 18:55 by PCW 1 2 3 ... 6	Replies:52 Views:4528	Last Post by PCW 01 Nov 2024 18:55
Update failure Topic started 16 Oct 2024 12:29, by chuben Last Post 23 Oct 2024 23:32 by phillc54 1 2	Replies:19 Views:1736	Last Post by phillc54 23 Oct 2024 23:32
QtPlasmaC SIM Estop Label Topic started 12 Sep 2024 10:16, by Plasmanfm Last Post 08 Oct 2024 11:12 by tommylight	Replies:1 Views:457	Last Post by tommylight 08 Oct 2024 11:12
When probing down it does not reverse to go to probe height Topic started 01 Oct 2024 17:09, by Clive S Last Post 02 Oct 2024 13:01 by snowgoer540	Replies:5 Views:459	Last Post by snowgoer540 02 Oct 2024 13:01
x and y switched Topic started 25 Sep 2024 07:11, by bentiggin Last Post 28 Sep 2024 10:37 by andypugh	Replies:7 Views:630	Last Post by andypugh 28 Sep 2024 10:37
Thank you! Topic started 22 Sep 2024 23:29, by adaoferre Last Post 23 Sep 2024 00:54 by tommylight	Replies:3 Views:460	Last Post by tommylight 23 Sep 2024 00:54
Straight cut error Topic started 15 Aug 2024 16:42, by LucasWorx Last Post 16 Sep 2024 14:32 by LucasWorx	Replies:8 Views:682	LucasWorx Last Post by LucasWorx 16 Sep 2024 14:32
Inssues Arc Start Topic started 27 Aug 2024 17:56, by paulsao Last Post 14 Sep 2024 16:43 by paulsao	Replies:9 Views:606	Last Post by paulsao 14 Sep 2024 16:43
Qtplasmac SIM Estop Label Topic started 12 Sep 2024 08:57, by Plasmanfm Last Post 13 Sep 2024 09:04 by Plasmanfm	Replies:2 Views:448	Plasmanfm Last Post by Plasmanfm 13 Sep 2024 09:04
Where is qtplasmac_comp.hal loaded Topic started 07 Sep 2024 21:59, by rodw Last Post 09 Sep 2024 11:54 by rodw	Replies:2 Views:505	Last Post by rodw 09 Sep 2024 11:54
Plasmac Breakaway roadblock (mental one anyway) Topic started 10 Aug 2024 02:17, by rodw Last Post 09 Sep 2024 11:51 by rodw	Replies:3 Views:538	Last Post by rodw 09 Sep 2024 11:51
#<holes> = 3 - Unexpected behaviour Topic started 26 Aug 2024 02:33, by CFE Last Post 01 Sep 2024 22:49 by CFE 1 2 3	Replies:26 Views:2045	CFE Last Post by CFE 01 Sep 2024 22:49
Override set_default_blending Topic started 08 Jul 2024 12:20, by rodw Last Post 27 Aug 2024 11:23 by rodw 1 2	Replies:18 Views:1600	Last Post by rodw 27 Aug 2024 11:23
Plasmac2QTplasma gives error not a Plasmac configuration /solved Topic started 18 Aug 2024 15:51, by CNCFred Last Post 18 Aug 2024 19:15 by CNCFred	Replies:2 Views:491	Last Post by CNCFred 18 Aug 2024 19:15
X and Y switched Topic started 26 Jul 2024 15:19, by cutnweld Last Post 27 Jul 2024 22:59 by snowgoer540	Replies:8 Views:748	Last Post by snowgoer540 27 Jul 2024 22:59
Best QTplasmac version to use Topic started 24 Jun 2024 12:42, by rodw Last Post 22 Jul 2024 10:27 by rodw	Replies:3 Views:845	Last Post by rodw 22 Jul 2024 10:27
qtplasmac "torch not showing" Topic started 02 Jul 2024 11:59, by Altenthaler1988 Last Post 14 Jul 2024 05:10 by Altenthaler1988 1 2 3 4	Replies:32 Views:3519	Altenthaler1988 Last Post by Altenthaler1988 14 Jul 2024 05:10
use a older snapon plasma50 for DIY CNC Topic started 11 Jun 2024 17:30, by redeye_joe Last Post 08 Jul 2024 21:30 by PCW 1 2	Replies:10 Views:1482	Last Post by PCW 08 Jul 2024 21:30
Tool Library Error Topic started 14 Jun 2024 11:22, by Sparkman61 Last Post 21 Jun 2024 18:53 by snowgoer540	Replies:3 Views:629	Last Post by snowgoer540 21 Jun 2024 18:53
qtplasmac arc okay issue Topic started 18 Jun 2024 19:19, by RMJ fabrication Last Post 19 Jun 2024 10:18 by rodw	Replies:2 Views:553	Last Post by rodw 19 Jun 2024 10:18

Time to create page: 0.118 seconds